EZ-Kote MLEX-2 Product Overview

The 21st Century solution for mold release for Epoxies and Urethanes

Datasheet for MLEX-2

EZ-Kote MLEX-2 is a non-transferring and environmentally friendly mold release designed specifically for urethane and epoxies. EZ-Kote releases the molded parts easily, allowing for immediate mold prep which aids in decreasing shot cycle time.

EZ-Kote MLEX-2 is available in several formulations to meet the most exacting needs in mold release applications. The MLEX-2 is formulated for Urethane , RTV Silicone and FRP molds as well as metal molds including aluminum or steel. MLEX-2 gives a low gloss finish to the molded part and is excellent for shoe sole production where paintability and bondability are achievable without post part cleaning.

EZ-Kote Advantages:

• No wax build-up, allowing molds to stay cleaner up to 10 times longer
• Reduces downtime between applications by providing a clean release
• Contains no VOC’s
• Instant curing helps reduce cycle time
  Is effective with Integral Skin Foam and Rigid Foams
• Releases All Reinforced Plastics and Composites.
  

EZ-Kote Application Guidelines:

1. The Mold surface must be thoroughly clean and dry. Clean the mold with a proper cleaning agent to remove the existing mold release and contaminants.
2. Apply one to three coats of EZ-Kote to the mold from three different directions.
3. For molds in production apply a minimal coat from three directions and allow the film to completely dry. This should take only seconds.
4. Touch-up every 5th heat or as needed.